GE DS200NATOG2A DS200NATOG3A
| Brand | GE |
| Module Number | DS200NATOG2A DS200NATOG3A |
| Unit price | $4999 |
| Country Of Origin | USA |
| Weight | 0.75KG |
| Certificate |
C/O from the Chamber of Commerce C/Q from the Manufacturer |
| Warranty | 12 Months |
| Inventory Qty | 6 |
GE DS200NATOG2A 3A is Voltage feedback scaling board
Consist of components as below
It consists of 5 identical and connected precision resistor strings:
3 for three-phase AC (one for each phase)
1 for positive DC bus voltage
1 for negative DC bus voltage
Each resistor string can be configured through 3 different input selector connectors and 2 jumpers
Supports 5 input voltage levels: 6000V, 4200V, 3300V, 2200V, 1200V
The outputs of the 5 resistor strings are gathered into a 20-pin flat ribbon connector
Each output is equipped with a metal oxide varistor (MOV) to prevent the output voltage from being too high when the output ribbon is disconnected The load resistor is not located on the NATO board, but on the gate distribution and status board that is used in conjunction.
Account Number 88800006406771
Account name Vogi International Trading Co., Limited
(* If the account name exceeds the available space, please continue in the address field.)
SWITF/BIC Code WIHBHKHHXXX
Bank name OCBC Hong Kong Branch
Bank address 161 Queen's Road Central, Central, Hong Kong
Country/Region Hong Kong (China)
Account type Business Account
Bank code 035
Payment method For the payment of goods, please make a FPS/CHATS/SWIFT Payment
Notes Please include the following memo/message to receiver when making a payment: [Buyer Name] [Invoice/Contract Number] [Product]
Core functions and different DS200NATOG3A
Attenuate the AC and DC voltages of the SCR bridge to enable the precise acquisition of the bridge voltage feedback signal. Work in conjunction with the VME backplane, gate distribution and status board.
|
Comparison |
DS200NATOG2A |
DS200NATOG3A |
|
Hardware design |
Improved version, the resistance network design has been adjusted. For instance, jumpers (Jumper) have been used instead of some resistors in the G1 version. |
The design focuses differ, with a greater emphasis on electrical isolation. Compared to the previous generation, the isolation performance has significantly improved. |
|
Core Function |
Focus on signal attenuation and coordination. Usually works in conjunction with the gate allocation status board and VME backplane, precisely attenuating the voltage of the SCR bridge. |
Focus on signal isolation and protection. In addition to the basic proportional scaling, it provides better overvoltage protection capabilities and enhances the stability of the system. |
|
Protective Value |
Standard level, meeting the requirements of routine operating conditions |
Better. Because it enhances the electrical isolation design, it can more effectively block high-voltage interference and protect the subsequent control circuits. |
