GE IS410TRLYS1B IS400TRLYS1BJJ
| Brand | GE |
| Module Number | IS410TRLYS1B IS400TRLYS1B |
| Unit price | $5999 |
| Country Of Origin | USA |
| Weight | 0.75KG |
| Certificate |
C/O from the Chamber of Commerce C/Q from the Manufacturer |
| Warranty | 12 Months |
| Inventory Qty | 1 |
GE IS410TRLYS1B is terminal board and IS400TRLYS1B is also terminal board, they are used with the YDOA safety relay output IO pack.
|
Parameter |
Specification |
|
Input Voltage |
24V DC |
|
Output Channel |
Up to 16 Form-C relays |
|
Contact capacity |
2A per point |
|
Response time |
Action ≤ 10ms, Release ≤ 5ms |
Account Number 88800006406771
Account name Vogi International Trading Co., Limited
(* If the account name exceeds the available space, please continue in the address field.)
SWITF/BIC Code WIHBHKHHXXX
Bank name OCBC Hong Kong Branch
Bank address 161 Queen's Road Central, Central, Hong Kong
Country/Region Hong Kong (China)
Account type Business Account
Bank code 035
Payment method For the payment of goods, please make a FPS/CHATS/SWIFT Payment
Notes Please include the following memo/message to receiver when making a payment: [Buyer Name] [Invoice/Contract Number] [Product]
How to use IO Pack and terminal board
Insert the I/O Pack module directly into the corresponding DC-37 pin connector on the IS400TRLYS1B board.
Simplex mode: Use JA1 connector.
Three-Module Redundancy (TMR) mode: All three connectors, JR1, JS1, and JT1, must be used simultaneously, corresponding to three redundant I/O Packs respectively.
External wiring: Clear wiring points are provided on the terminal board.
Relay output: Connected to an I/O connector panel with two 24-pin terminals, capable of accommodating #12 AWG cables.
Power Supply:
To supply power for output 1-6: Connect to JF1 or cascade power supply through JF2; or directly connect to TB3.
Supply power for special output 12: Connect to JG1
Configuration of jumper wires and modes
Output configuration: There are 12 relays on the board. Outputs 1 to 6 can be flexibly configured through jumper wires JP1 to JP6.
Dry contact output: As an inductive contact, it can switch between external AC or DC signals.
Electromagnetic valve drive: After installing the jumper wires, it can provide power to the on-site electromagnetic valve and protect the system using the onboard fuse and suppression circuit.
Working mode: Supports two working modes: simplex and three-mode redundancy (TMR). It is a core component for building highly reliable security systems.
How do the two interact and influence each other?
Terminal Board (IS400TRLYS1B): As the physical interface between field devices (such as solenoid valves, pumps, alarms) and the control system. It receives low-voltage control signals from the I/O Pack, uses the relays on it for electrical isolation and power amplification, and drives external loads. It is mainly responsible for wiring and signal conversion.
I/O Pack Module: This is the intelligent core of the system, responsible for executing control logic and communication. It does not directly connect to the field devices; instead, it is directly plugged into the terminal board through the connectors on the terminal board, forming a tightly integrated physical and electrical whole.
Interaction process:
The instructions of the control system are first received and processed by the I/O Pack module.
The I/O Pack module transmits the instructions through its bottom interface to the plugged-in IS400TRLYS1B terminal board.
The relays on the terminal board perform switching actions according to the instructions, thereby connecting or disconnecting the power supply of the external devices connected to its terminals, achieving the control of the on-site equipment.
